Turberticus
Well-known member
Hi all, I recently purchased a Sandisk 64GB CF Express type B card to use in my D500. When I insert the card the LCD shows Err on the bottom right and CArd on the top. I formatted the card on my PC and reinserted it with the camera powered off. While off with the card inserted I was able to get the remaining shot count on the bottom right of the LCD, but when I turn the camera on it immediately shows the Err and CArd messages on the LCD. I tried turning it on/off a few times and I was able to get the CF Express card to work and write some test photos to it, but it eventually goes back to Err. I also tried doing the two button reset as well as the "Reset all Settings" option from the Menu, but I'm still getting the same behavior. When I attempt to format the card in camera I get "Cannot access and format this memory card. Insert another card". My PC recognizes the card just fine. Would you say this is an issue with the CFe slot on my D500, or a card issue? I have the latest firmware (1.31) and a fresh battery. Thanks!